Cisco routers and switches everywhere

Standard interface
host$ telnet 8.8.8.1
Trying 8.8.8.1...
Connected to 8.8.8.1.
Escape character is '^]'.

User Access Verification

Password:
router>enable
Password:
router#config terminal
router(config)#int e0/1
router(interface e0/1)#duplex full
router(interface e0/1)#^Z
router#show int e0/1
Ethernet0/1 is up, line protocol is up (connected) 
  Hardware is Ethernet, address is 000f.8f92.5501 (bia 000f.8f92.5501)
  MTU 1500 bytes, BW 10000 Kbit, DLY 100 usec, 
     reliability 255/255, txload 96/255, rxload 7/255
  Encapsulation ARPA, loopback not set
  Keepalive set (10 sec)
  Full-duplex, 10Mb/s, media type is 10BaseT